30-50 mm Extrusion Machine / Extruder

main wire drawing machine page no.1	main wire drawing machine page no.2	main wire drawing machine page no.3	main wire drawing machine page no.4	main wire drawing machine page no.5
main Extrusion  machine page no.1	main Extrusion machine page no.2	main Extrusion machine page no.3	main Extrusion machine page no.4	main Extrusion machine  page no.5

¡@

*The information above may differ due to compound of material.

2.] Features:

2.1.) Type:

2.1.1.) For Model EV-32V, vertical type with triangle legs with short space for color stripping only

2.1.2.) For Model EV-32-40-50, horizontal compact type with three directions free portable support stand

2.2.) Application: to combine with main Extrusion line for PVC/LDPE wire color stripping and/or skin sheathing

2.3.) Screw: BM type, C/R: 3.0

2.4.) Driven motor: AC motor c/w Inverter

3.] Machine composition:

3.1.) Striping extruder..........................1 set

3.2.) Injection point..............................1 set

3.3.) Auto-Loading Hopper..................1 set

3.4.) Operation panel w/ cabinet..........1 set

3.5.) Portable support stand................1 set

4.] Detail specifications:

4.1.) Main body of extruder:

4.1.1.) Screw type:

a.) Single thread compression type for color stripping

b.) BM Double thread compression type for skin sheathing

4.1.2.) Screw material:

a.) Material used: SACM1

b.) Treatment: to be nitrogenous treated after precision processing for screw thread and hard chrome plating for concave portion. hardness up to 80Hs

4.1.3.) Cylinder:

a.) Material: SACM 1

b.) Treatment: to be treated after precision processing, hardness up to 90HS

4.1.4.) Gear box:

a.) Box: a reduction worm gear box to be fitted on the support stand

b.) Transmission: flange type AC motor > gear box > screw

4.1.5.) Injection point:

a.) Type: screw joint type fix to the die holder of main extruder from top direction of the main cross head

b.) Clamp of x-head: 4 bolts lock type

4.1.6.) Hopper:

a.) Type: cone type

b.) Capacity: 12kg for EV-32 & EV-40, 25Kg for EV-50

c.) Shape: a viewing window, a take out port and a shutter to be fitted

4.1.7.) Loading of PVC: By manual (auto-loading is optional)

4.2.) Temperature controller:

4.2.1.) Type: Main control panel installed in the support stand, operation panel mounted near the cross head position for easy operation

4.2.2.) Temperature controller: PID type ¡Ó1¢J.

4.2.3.) No. of temperature controller: 4 sets total

Cylinder zone: 3 sets

Injection point: 1 set

4.2.4.) Heater:

Cylinder: stainless steel band type 3 sections

Injection point: 1 set

4.2.5.) Cooling: fan cooling

a.) Cylinder: by 3 pcs of square cooling fans attached on the cover of cylinder.

b.) Injection pointed: by natural cooling

4.2.6.) Application of operation panel:

a.) Power source control

b.) Heating control

c.) Ampere/voltage meter

d.) Temperature controller

4.3.) Portable stand:

4.3.1.) Type: support stand with free rotating and forward/backward moving device, machine is very easy to mount with main extruder.

4.3.2.) Center height adjust: done by air cylinder for small adjust during joint work between injection point and the main extruder for precision adjusting

4.4.) Triangle stand: (Option)

4.4.1.) Optional order for EV-32V 32mm Color stripping extruder incase of small space occupied propose

4.4.2.) Type: portable type with triangle legs

4.4.3.) Height adjust: with a gear lack on the support stand, height of extruder is adjusted by a handle wheel

4.4.4.) Triangle leg: with moving roller and fix bolt

5.] Operation direction: Right hand (from left to right)